MODEL ENGINEERING
PRODUCTS BEXHILL

ALL FULLY MACHINED KITS NOW SUPPLIED WITH A BUILD MANUAL BY DEREK WILSON

ALL OF THE FULLY MACHINED KIT LOCO'S COMPRISE THE FOLLOWING PARTS

FIBREGLASS BODYSHELL AS FROM MOULD OR LASER CUT STEEL BODY, 3 OR 4 150 WATT MOTORS,100 AMP CONTROLLER WITH CHASSIS SOCKET AND PLUG IN HANDSET, GEAR SETS,MOTOR MOUNTING PLATES,BUSHES, CHASSIS PRE-WELDED ALONG WITH BOGIE FRAMES, AXLE BOXES EITHER STEEL WITH SEALED BALL RACES OR DELRIN, STEEL 4" DIA. WHEELS,AXLES,SPRING BUFFERS, COUPLINGS,AXLE BOX RETAINERS WHERE APPLICABLE, AND ALL SCREWS NUTS AND BOLTS TO FIT ALL PARTS TOGETHER, LOCTITE 603 IS SUPPLIED WITH ALL KITS AND FOR STEEL BODY KITS AN ADDITIONAL LOCTITE IS SUPPLIED 326. BUILD MANUAL AND CONTROLLER MANUAL SUPPLIED.ALL HOLES ARE DRILLED AND TAPPED WHERE APPLICABLE, THERE ARE SOME THAT MUST BE DRILLED FROM JOB BUT NO TAPPED HOLES ARE REQUIRED.BUFFERS COME WITH SPRINGS AND SHAFTS AND ARE SECURED TO BUFFER BEAM BY 12MM NUT.

TOOLS REQUIRED

A CORDLESS DRILL OR SIMILAR,DRILLS, FILES, USUAL HAND TOOLS,EMERY CLOTH ETC.

	CLASS 15. A FULLY MACHINED SELF ASSEMBLY LOCO, AN ALL STEEL MODEL,CHASSIS AND BOGIES ARE PRE-WELDED, THE BODY IS OF ALL LASER CUT PANELS WHICH ARE BONDED AND SCREWED TOGETHER (INDUSTRIAL LOCTITE 326) THE BONNET IS A ALUMINIUM CASTING,ALL FASTENERS ARE SUPPLIED,COMES WITH 4 MOTORS,CONTROLLER,GEARING IN FACT ALL YOU NEED TO MAKE IT GO WHEN COMPLETED (LESS BATTERIES) 24 VOLT SYSTEM THE ONLY TOOLS REQUIRED ARE A CORDLESS DRILL FILES EMERY,AND USUAL HAND TOOLS. BUILD MANUAL SUPPLIED LENGTH.--46"
	CLASS 20 ANOTHER ONE OF OUR ALL STEEL CONSTRUCTION FULLY MACHINED SELF ASSEMBLY KITS, SAME SPEC AS THE CLASS 15 LENGTH.--49" 4 MOTORS
	CLASS 27 FULLY MACHINED SELF ASSEMBLY KIT WITH A FIBREGLASS BODYSHELL AS FROM MOULD.CHASSIS AND BOGIES ARE PRE-WELDED AND ALL PARTS ARE MACHINED SO THAT THE MINIMUM OF TOOLS ARE REQUIRED FOR ASSEMBLY. LENGTH.--54" 4 MOTORS
	CLASS 33. FULLY MACHINED SELF ASSEMBLY KIT WITH A FIBREGLASS BODYSHELL AS FROM MOULD,CHASSIS AND BOGIES ARE PRE-WELDED AND ALL PARTS ARE MACHINED SO THAT THE MINIMUM OF TOOLS IS REQUIRED FOR ASSEMBLY LENGTH.--54" 4 MOTORS
	CLASS 35 "HYMEC" FULLY MACHINED SELF ASSEMBLY KIT WITH FIBREGLASS ONE PIECE BODY AS FROM MOULD,CHASSIS AND BOGIES ARE PRE-WELDED, ALL PARTS ARE MACHINED READY TO CLEAN UP AND ASSEMBLE, MINIMUM HAND TOOLS REQUIRED FOR ASSEMBLY LENGTH.--53" 4 MOTORS
	CLASS 37. FULLY MACHINED SELF ASSEMBLY KIT,WITH ONE PIECE FIBREGLASS BODY MOULDING AS FROM MOULD.CHASSIS AND BOGIES PRE-WELDED, MINIMUM AMOUNT OF HAND TOOLS REQUIRED TO BUILD THE LOCO. LENGTH.--67" 4 OR 6 MOTORS
	CLASS 55 "DELTIC" A FULLY MACHINED SELF ASSEMBLY KIT WITH A ONE PIECE FIBREGLASS BODY AS FROM MOULD. CHASSIS AND BOGIE FRAMES ARE PRE-WELDED. MINIMUM AMOUNT OF HAND TOOLS REQUIRED TO ASSEMBLE LENGTH.--72" 4 OR 6 MOTORS
	CLASS 73 A FULLY MACHINED SELF ASSEMBLY KIT WITH A ONE PIECE FIBREGLASS BODYSHELL AS FROM MOULD,CHASSIS AND BOGIES ARE PRE-WELDED SO THAT A MINIMUM OF HAND TOOLS IS REQUIRED TO ASSEMBLE LENGTH.--57" 4 MOTORS